Velleman CAMSETW1 Manuel D'utilisation

CAMSETW1 – WIRELESS 4-CHANNEL B/W SECURITY SYSTEM 2.4GHz
1. Introduction
Thank you for buying the CAMSETW1! Please read the manual thoroughly before bringing this device into service.
Make sure that the device was not damaged in transit. If the device is damaged, you should contact your dealer.
Verify if you have received all components:
• 1 camera
• 1 monitor
• 2 adapters
• 1 quick-start manual
• 1 detailed manual
2. Description
a) Camera
1. IR LEDs : 8 IR LEDs for night vision
2. Lens : focuses the image automatically, without
additional adjustment
3. Lens body : rotates up to 180°
4. Microphone
5. A/V antenna 2.4GHz (front) : Transmits A/V
signals. Note that the antenna doesn't turn 360°!
See "Orienting the Camera and the Monitor" on p.
3).
6. Channel selector : Put the switch on the desired number to select the channel you want. Be sure to select the
same channel on both the camera and the monitor.
7. ON /OFF LED
8. OFF/ON/NIGHT switch : ON/OFF switch + ON switch for night vision function
9. 9V power adapter plug
10. Mounting hole
11. Battery compartment
b) Monitor
1. ON/OFF switch + volume control
2. Screen ON/OFF : Turn off the screen for audio
monitoring only.
3. Power indicator (ON/OFF LED)
4. Jack for 13.5V adapter
5. DIP switches : Place the switch for a particular
channel in the ON position to select that
channel. Set the same channel on the camera
and the monitor. Switch 5 sets the timer for the
auto sequence function (see "Auto Sequence
Function for Monitoring Multiple Locations") on p. 3
6. Audio output jack (white)
7. Video output jack (yellow)
8. V-HOLD (vertical picture adjustment)
9. BRIGHTNESS
CAMSETW1
Fig. 1
Fig. 2
1 VELLEMAN