Velleman CCTVPROM10 Notice D'emploi page 13

To enable/disable preview channels:
1) Choose a channel you wish to conceal. For example, channel 3. Under PREVIEW, select OFF.
2) Click APPLY. Channel 3 will turn black. Click CLOSE in the confirmation window.
3) Click EXIT in all menus until al windows are closed.
7.3.4.5 AUDIO
Use the Audio menu to set the resolution and camera system on the system.
To configure video options:
1) Under CAMERA SYSTEM, select NTSC or PAL.
2) Click APPLY. Click CLOSE in the confirmation window.
3) Click EXIT in all menus until all windows are closed.
To configure audio options:
1) From the Audio menu, click VOLUME SETUP. A split-screen display view appears.
2) Click any channel and adjust the slider to increase/decrease the volume for listen-in audio.
3) Click X to return to the Audio menu.
4) Click APPLY. Click SURE in the confirmation window.
5) Click EXIT in all menus until all windows are closed.
LOOP TIME:
1) Click the input box to set.
2) Left click to exit, Click SURE in the confirmation window.
3) Click EXIT in all menus until all windows are closed.
7.3.5 ADVANCE
Use the advanced setup menu to configure alarm settings, motion detection, mobile surveillance, PTZ
settings and network settings. The advanced setup menu contains the following sub-menus: Alarm,
Info, MD, Mobile, System, PTZ, and Network.
12/04/2011
CCTVPROM10
13
©Velleman nv