Velleman CCTVPROM10 Notice D'emploi page 18

4) If necessary, change the Media and Web Ports.
NOTE: For added security, we strongly recommend changing Web port 80 on the system to any
desired port not blocked by your Internet service provider (ISP). Please note however, that
you will also need to update the Web port in your browser and open this new port in your
router.
5) Click APPLY. Click SURE in the confirmation window.
6) Click EXIT in all menus until all windows are closed. The system restarts automatically.
Manual DNS
Enter the Primary or Secondary DNS from your router. This is required for DDNS to function
properly.
To obtain your Primary or Secondary DNS:
1) In your web browser, log in to your router using its Default Gateway address.
NOTE: Refer to your router`s manual or software for login information. You can also get the
Default Gateway on your PC by selecting Start>Run. Type CMD and press Enter. In the
Command Prompt window type ipconfig and press Enter.
2) View its WAN settings. Enter the Primary or Secondary DNS address in the MANUAL DNS
field on your system.
DDNS:
A DDNS account allows you to set up a web site address that points back to your Local Network.
NOTE: You must register DDNS service prior to configuring DDNS settings. Visit
https://www.dyndns.com/
To configure DDNS settings:
1) From the Network Setup menu, enter Primary or Secondary DNS from the WAN settings
of your router in the MANUAL DNS field.
2) Click DDNS SETTINGS.
3) Under DDNS, select ON.
4) Under SERVICE, select 3322, dyndns or perfecteyes.
5) Under DOMAIN NAME, enter your DDNS domain from the confirmation email.
For example, if your domain name is adam@dyndns.com, you need to enter
adam@dyndns.com, in the text field.
6) Enter your DDNS user name and password in the respective fields.
7) Click APPLY. Click SURE in the confirmation window.
8) Click EXIT. The system will prompt you that it must restart. Click CLOSE.
12/04/2011
CCTVPROM10
to register.
.
18
©Velleman nv