Velleman CCTVPROM10 Notice D'emploi page 7

To use the File List:
1) Under CHN SWITCH, select individual channels or select ALL.
2) Under TYPE, select NORMAL to view only normal recordings, ALARM, to view alarm recordings
(includes alarm and motion detection), or ALL to view all video on your system.
3) Use the buttons on the side panel to navigate the file list:
• FIRST: Jump to the first page of the list
• PRE: Turn to the previous page
• NEXT: Turn to the next page
• LAST: Jump to the last page of the list
• ALL: Select all files
• OTHER: Clear all files
• BACKUP: After selecting a file(s), click to begin copying the data to a USB flash drive (not
included);
4) Click any file to begin playback.
BACKUP
NOTE: The system is compatible with most major brands of USB flash drives, with capacities from 256
MB to 4 GB.
To backup recorded data:
1) Connect a blank USB flash drive to the bottom USB port on the front panel of the system.
2) Open the Search menu and search for recorded data on the system, click FILE LIST and select the
files you want to backup.
3) Click the "BAK" box next to the filename. Select multiple files if desired, click ALL to select all files;
click OTHER to deselect all files.
NOTE: The size of each file is shown in the File List menu. Use this to help you find a USB flash drive
large enough to hold all the files you wish to backup.
4) Click BACKUP from the side-panel to immediately begin copying the files to the USB flash drive.
NOTE: Backup progress appears in the status window. DO NOT remove the USB flash drive during
backup.
Notes:
1) When free space on the backup device is less than the size of the file to back-up, the system will
prompt "Space not enough"...
2) You can remove the USB device directly when backup is finished.
12/04/2011
CCTVPROM10
7
©Velleman nv