Operation; Before Switching On; Starting The Massage - Beurer MC3800 Mode D'emploi

Step 5
Step 6

6. Operation

Warning!
• Before using the device for the first time, read the safety notes in the Safety section.
Safety, pages 14 to 15
w
Danger of tipping!
• Sit down carefully on the chair and only when it is in the upright position. Never sit down on the chair when it is
in the flat position.
Caution!
• If you experience irritations of any kind, stop treatment immediately.
Important!
• Never remove the back cushion during the massage.

Before switching on

• Wear comfortable clothes during the massage.
• Remove all objects from your trouser pockets (e.g. keys, pocket knife, mobile phone).
• Assume a comfortable, relaxed position.
• Always sit in the middle of the seat so that your spine is positioned precisely between the massage rollers.
• The massage should feel pleasant and relaxing at all times. If the massage is painful or uncomfortable, stop the
massage or change your sitting position.
• If the device has not been used for a longer period of time, check that the device is functioning correctly before
use.

Starting the massage

> Press the on/o button on the hand switch
After being switched on, the back rest reclines and the leg rest is raised. At the same time, the entire back is
scanned to determine the size of the user. The relax massage programme is activated after the user's back has
been scanned.
• Press the vibration intensity button in order to adjust or switch off the intensity of the vibration massage in the
seat or foot area.
• The vibration massage can be switched on or off separately for the seat and feet.
> Connect the lower end of the back cushion and the lower end of the
seat cushion using the zip fastening
> Lay the seat cushion with the back cushion on the massage chair
over the back rest and attach beneath the seating surface using the
hook and loop fastener provided.
> Connect the back cushion and the back rest using the zip fastening
> Plug the mains plug into a socket
> Switch on the main switch in the foot area
> Switch on the massage chair at the on/off button on the hand switch
The massage chair is now ready for operation.
20