Locking The Controller; Keypad Locking; Key Locking (Optional) - Handicare PG Driving Technologies R-NET Manuel D'utilisation

28 | Locking the controller

7. Locking the controller
The control system can be locked in one of two ways.
Either using a button sequence on the keypad or with a
physical key. How the control system is locked depends
on how the wheelchair manufacturer has programmed
the system.

7.1 Keypad Locking

To lock the wheelchair using the keypad;
 While the control system is switched on, depress
and hold the on/off button.
 After 1 second the control system will beep. Now
release the on/off button
 Defl ect the joystick forwards until the control system
beeps.
 Defl ect the joystick in reverse until the control
system beeps.
 Release the joystick, there will be a long beep.
 The wheelchair is now locked.
To unlock the wheelchair using the keypad;
 If the control system has switched off, press the on/
off button.
 Defl ect the joystick forwards until the control system
beeps.
 Defl ect the joystick in reverse until the control
system beeps.
 Release the joystick, there will be a long beep.
 The wheelchair is now unlocked.

7.2 Key Locking (optional)

To lock the controller with the special key (H1 in fi gure
6):
 Insert and remove the special key into the Charger
Socket on the Controller (G in fi gure 6). The
controller is now locked and the following screen will
be displayed.
To unlock the controller with the special key:
 If the control system has switched off, press the On/
off (B in fi gure 2).
 Insert and remove the special key into the Charger
Socket on the Controller (G in fi gure 6). The
controller is now unlocked.
Figure 6