Factory Settings (Reset) - Kroeplin C Série Mode D'emploi

Factory settings (RESET)
Resetting the instrument.
The gage must be switched on. The SETUP – Menu can be activated in each program.
Activating SETUP – Menu
1x long
„RESET" will appear in the display
7
x short
Activating RESET – Menu
1x long
Changing selection
1x short
For confirming and saving
1x long
Afterwards you will return to the SETUP ‐ Menu.
Quitting the SETUP – Menu
1x short
For confirming and saving.
The instrument returns to the last program used
1x long
The instrument is now reset to the status as delivered.
Activating / Deactivating keypad lock
You can „lock" the keypad on your instrument. This protects the keypad against
inadvertent activation.
When the keypad lock is active nevertheless the measuring value can be transferred
by using the „DATA" key and by using the „ON/<0>" the instrument can be switched
on and off. If locked keys are pressed the symbol (17) „Keypad lock active" appears in
the display. The key pad lock can be activated in each measuring program.
For activating the keypad lock press and hold both keys
+
simultaneously.
1x simultaneous /
short
Symbol (17) for „keypad lock active" appears in the
display footer.
For deactivating the keypad lock press and hold both
+
keys simultaneously.
1x simultaneous /
short
18