Data Logger (D-Log) - Kroeplin C Série Mode D'emploi

Data Logger (d‐LOG)
This instrument is provided with a data logger which stores the measured value into the
internal memory by pressing the „DATA" key. Max. 80 measuring values can be stored
with consecutive numbering.
The readout of the data will be made by the computer software and USB interface ( Spare
parts / Accessories).
„RESET" deletes all data within the internal memory.
The gage must be switched on. The SETUP – Menu can be activated in each program.
1
1x long
2
6
x short
3
1x long
The last selected status will appear in the display / Factory setting: OFF
4
short
7
short
5
1x long
6
7
2x short
8
1x long
Measuring values cannot be saved if the symbol (16) „DL" is blinking (full
memory). The measured values must be transferred by computer software and
USB interface
SETUP – Menu
Activating
„d ‐ LOG" will appear in the display
the d – LOG – Menu
Activating
Changing the status.... or
......delete internal memory
For confirming and saving
Afterwards you will return to the SETUP ‐
Menu.
Quitting the SETUP – Menu
For confirming and saving.
The instrument returns to the last program used
Symbol (16) for „Data Logger" appears in the
display
17