Connecting To A Power Source - Toro QuieTech 51589 Mode D'emploi

Converting from Vacuum
to Blower
1.
2.
3.
4.
Important: The blower will not run unless the bottom
inlet cover is turned clockwise as far as possible,
locking it in place (step 4).
5.
4
Operation
Connecting to a Power
Source
Use only a polarized (i.e., one blade is wider than the
other), UL listed (CSA certified in Canada) extension
cord recommended for outdoor use. A polarized plug
will fit in a polarized cord only one way. If the plug
does not fit fully in the cord, reverse the cord. If it still
does not fit, purchase a polarized extension cord. Do
not change the plug in any way.
Extension Cord Length Minimum Wire Gage (A.W.G.)
Note: Do not use an extension cord over 150 feet.
If you do not fully seat the extension cord on
the inlet plug, the loose plug could lead to
overheating and cause a fire, possibly
burning you or others.
m–4609
Ensure that you fully seat the cord on the
plug and use the cord lock feature to secure
the cord.
Important: Check the power cord frequently during
use for holes in the insulation. Do not use a damaged
cord. Do not run the cord through standing water or
wet grass.
3323–603
100 ft.
150 ft.
Warning
16
14