Information Display - Teac UD-701N Mode D'emploi

PCM signal D/A conversion
DELTA SIGMA Fs
MENU
DELTA SIGMA Fs
512x Fs
This sets the ΔΣ modulator sampling frequency.
Select the sound setting you prefer.
128× Fs
256× Fs
512× Fs
PCM DELTA SIGMA
MENU
PCM DELTA SIGMA
MULTI BIT
This sets the ΔΣ modulator output format.
MULTI BIT
This outputs using multi level.
DSD (1 BIT)
This outputs using DSD format.
DSD low-pass filter
MENU
DSD LOW PASS FILTER
OFF
OFF
The low pass filter is disabled.
FIR 1
FIR low pass filter type 1
FIR 2
FIR low pass filter type 2
o FIR 1 and FIR 2 settings are only effective during DSD input and/
or when PCM DELTA SIGMA is set to DSD (1 BIT).
Display style during network input
MENU
NET DISPLAY STYLE
NORMAL
Select what is shown when the network is the playback source.
NORMAL
The playback source is shown with the input signal format or
volume.
PLAYER
The index, time and other items are shown.
Network input circuit power supply setting
MENU
NETWORK
ENABLED
Use this to turn the network input circuit power supply on and off.
ENABLED
This turns the network input circuit power supply on and plays
audio files from the network.
DISABLED
This turns the network input circuit power supply off, stopping
operation of the network input circuit.
NET will not be shown as an input source option (page 16).

Information display

MENU
VERSION INFO
SYSTEM
This shows the version of the firmware used by the unit.
SYSTEM
The microcomputer firmware version
USB
The USB firmware version
FPGA
The FPGA firmware version
Bluetooth
The Bluetooth module firmware version
NETWORK
The network module firmware version
EN
25