Teac UD-701N Mode D'emploi page 24

Settings (continued)
Headphone setting (XLR)
MENU
HEADPHONE XLR
BALANCED
Set the driver type of the headphones connected to the BALANCED
PHONES jack.
BALANCED
Balanced headphones are operated with differential drive.
The negative and positive connectors operate with opposite
polarities.
ACTIVE GROUND
The amp drives so that the negative connector of balanced head-
phones is 0 V.
Display brightness
MENU
DIMMER
BRIGHT
BRIGHT
Bright
SLIGHTLY BRIGHT
Lit dimly
DARK
Dark
AUTO OFF
Turns off automatically
o The display turns off when not being operated.
Volume display
MENU
VOLUME TYPE
STEP (0-100)
This sets how the volume is shown.
STEP (0-100)
This shows the volume in steps from 0 (minimum) to 100 (maximum).
dB
This shows the volume in decibels (dB).
24
Screen indication
Select the information shown to the right of the playback source.
MENU
DISPLAY TYPE
VOLUME
VOLUME
The volume is shown.
SAMPLING FREQ.
Information about the playback source is shown.
Automatic power saving function
This unit has an automatic power saving function.
o The automatic power saving function is on when the unit is
shipped new from the factory.
MENU
AUTO POWER SAVING
ON
OFF
The automatic power saving function is disabled.
ON
The unit will automatically enter standby mode if no audio is output
and no operation is conducted for about 30 minutes.