Upconversion - Teac UD-701N Mode D'emploi

J
VOLUME knob
Use this to adjust the volume. Turn it right to increase and left
to decrease the volume.
o To enable adjustment of this unit's analog audio output
volume, set LINE OUT LEVEL to VARIABLE (page 23). This
will enable adjustment of the analog output level using this
unit's VOLUME knob.
o Volume settings are retained separately for analog audio
output and headphone output.
You can use the upconversion function with all input sources
(page 23).
The relationships between input sampling frequencies and sampling
frequencies after upconversion are as follows.
Input source
Digital
audio USB OFF
input
Input sampling
frequency
[kHz]
32 − 32
44.1 44.1 44.1
88.2 88.2 88.2
176.4 176.4 176.4
− 352.8 352.8
48 48 48
96 96 96
192 192 192
− 384 384
These values are not converted.
o The maximum upconversion is 8× Fs.
o Upconversion is not possible when the input is DSD.

Upconversion

Upconversion setting
2× Fs 4× Fs 8× Fs
Sampling frequency
after upconversion
[kHz]
64 128 256
88.2 176.4 352.8
88.2 176.4 352.8
176.4 176.4 352.8
352.8 352.8 352.8
96 192 384
96 192 384
192 192 384
384 384 384
EN
15