Cleaning And Maintenance; Cleaning The Appliance - SilverCrest SHBS 500 D4 Mode D'emploi

Cleaning and maintenance

DANGER! RISK OF ELECTRIC SHOCK!
► Always switch the appliance off before cleaning and pull out the
mains plug.
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. These
could damage the outer surfaces of the appliance.
► Never immerse the appliance in water or other liquids.

Cleaning the appliance

1) Remove the comb attachment 0/q from the shaving head 1 (see
section Fitting/removing the comb attachments).
2) Rinse the comb attachment 0/q in water and allow it to dry com-
pletely before re-attaching it to the appliance.
3) Clean the housing and the attachments with a slightly damp cloth. For
stubborn soiling use a mild detergent on the cloth.
4) Dry all parts thoroughly before using the appliance again or storing
it.
│
■ 18 GB│IE SHBS 500 D4