Timer And Sleep Operation - Sharp CD-BK147V Mode D'emploi

Timer and sleep operation

Timer playback:
The unit turns on and plays the desired source (video CD, CD, tuner, tape) at the pre-
set time.
Timer recording:
The unit turns on and starts recording from the tuner at the preset time.
Sleep operation:
The radio, video CD, CD and cassette tape can all be turned off automatically.
„ Timer playback or timer recording
Before setting timer:
1 Press the CLOCK button to check that the clock is on time.
2 For timer playback:
For timer recording:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD/VIDEO CD, TUNER (BAND) or TAPE (1
select the desired function.
To select the timer playback source: CD/VIDEO CD, TUNER (BAND) or TAPE
(1 2).
To select the timer recording source: TUNER (BAND).
When you selected the TUNER (BAND), tune in to the desired sta-
tion.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the TIMER/SLEEP button repeatedly to select timer playback
or timer recording.
Display the " " for timer playback and the " REC" for timer re-
cording.
Setting the clock (See page 12.) / Listening to the radio (See page 26.)
Load a cassette or discs to be played.
Load a cassette for recording in the TAPE 2 cas-
sette compartment.
2) button to
Continued to the next page
ENGLISH
01/8/29 CD-BK147V(X)E4.fm
CD-BK147V
E-32