Sharp CD-BK147V Mode D'emploi page 26

Listening to a CD (CDs) (continued)
CD-BK147V
To interrupt playback:
Press the button on the remote control.
To resume playback from the same point, press the
To stop playback:
Press the ( /RETURN) button.
To remove the CDs:
Whilst in the stop mode, press the
The disc tray will open. Remove the two discs. Then, press the DISC SKIP button to
rotate the disc tray and remove the remaining disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
The following playback functions are the same as video CD opera-
tions.
Direct search system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Repeat or random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Note:
Whilst in the "VCD ON" state, you cannot play back audio CDs.
Caution:
z Do not place two CDs in one disc tray.
z Do not push the disc tray whilst it is moving.
z Do not turn the disc tray by hand. This may cause malfunctions.
z If the power fails whilst the tray is open, wait until the power is restored.
z If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the
unit will not function. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.
z If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
E-25 ENGLISH
/SELECT/RESUME button.
OPEN/CLOSE button.
Page
„ To locate the beginning of a track
To move to the beginning of the next track:
Press the / button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
track number appears.
To restart the track being played:
Press the / button for less than 0.5 seconds during playback.
z You can skip to any track by pressing the
/
track number appears.
Notes:
z You can locate the beginning of a track on a single disc only.
z The PREV. or NEXT button on the remote control allows you to locate the
beginning of a track.
„ To locate the desired portion
For audible fast forward:
Press and hold down the / button during playback.
For audible fast reverse:
Press and hold down the / button during playback.
Notes:
z Normal playback will resume when the
z The or button on the remote control allows you to locate the desired por-
tion.
z You can locate the desired portion on a single disc only.
z When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, the unit will enter the playback mode.
01/8/29 CD-BK147V(X)E3.fm
button repeatedly until the desired
button repeatedly until the desired
/ or / button is released.