GE IM-4A Manuel D'utilisation Et D'installation page 24

WATER VALVE ASSEMBLY INSTALLATION INSTRUCTIONS P
Are these the right instructions for your model? Follow the Installation Instructions indicated by
the label on the back of the refrigerator ---
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
CAUTION –
•
Refrigerator. To eliminate the danger
of electric shock during installation,
you must unplug the refrigerator
from its electrical outlet.
TOOLS YOU WILL NEED
Flat blade and Phillips
screwdrivers
1/4" and 5/16" Nutdrivers
REMOVE THE COVER
1
Remove the screws holding the left side of the
compressor cover and save them for reinstallation
later. Bend the cover back to access the
compartment.
Installation Instructions
L
Unplug the
Pliers Sharp knife
or R
M N P Q
ATTACH THE WATER VALVE
2
• Locate the female connector plug (B). Plug the
female connector (B) onto the male terminals
on the water valve (3). Either wire can go on
either terminal.
• Fasten the water valve to the cabinet by inserting
the bracket hook on the left inner side of the
compressor compartment. Drive the hex-head
screw (10) from the kit through the hole in the
bracket into the hole on the cabinet.
24
B
3
10