Unit Price Setting Methods; Hotkeys - Gram ZFOC Série Manuel D'utilisation

Press this key to display battery voltage when the weight is 0.
Note: Please replace the 3PCS dry battery when the voltage is lower than 3.3V.

Unit price setting methods

Select the PLU that needs to set the unit price, pressing the direct PLU (M1 –
M6) or the indirect PLU using the numerical keys. In the case of indirect PLU,
enter the PLU number, for exemple 15 and then press the key.
Keep pressed the key for 1.5 seconds, at this time, the last digit of
display Total will flash.
Input the unit price using the numerical keys and press to confirm.
To exit press the key.

Hotkeys

PS1XD has hotkey function.
Please continuously press twice to shift PLU key when using the second
page PLU.
E.g. If you want to input 'PLU 36', press the first
hotkey twice continuously
so as to realize inputting 'PLU 36'.
14