Filter Setting; Select Weighing Unit; Limits Setup - Gram GX Série Manuel D'utilisation

to choose the desired range: 0.5d,1d,1.5d,2d,2.5d,3d,3.5d,4d,4.5d,5d. ("d" is
the division value, when n=3000). Press the key

Filter setting

Press the key
press again the key
environment, FILt2 for an unstable environment and FILt3 for very unstable
environment).
Press the key
select the desired mode and confirm pressing key

Select weighing unit

Press the key
press again the key
to access to the parameter, use the key
unit and confirm by pressing
Available weighing unit: kg, g, Lb.lb, Lb.oz, pcs. (counting-pieces)

Limits setup

Press the key
press the key
the mode "on" and then press
the key to change the first digit and use to
to confirm the introduced value.
Now, the indicator "over" will light on. Press the key
and use to move to the next digit. Press
for 3 seconds until the message "range" is displayed,
until seeing the message "FILtX" (FILt1 for a stable
to access to three available modes, press the keys
for 3 seconds until the message "range" is displayed,
until the display shows "Unit5" , press the key
for 3 seconds until the display shows the message "range",
to enter. The display will show "off", press the key
. Now the indicator "under" will light on. Press
to confirm.
.
to choose the desired weighing
move to the next digit. Press
to change the first digit
to confirm the introduced value.
to
to select
11