Weights Accumulation; Functions Setting - Gram K1 Manuel D'utilisation

Note: The container´s weight must be higher than 2% of maximum capacity.

WEIGHTS ACCUMULATION

1. Place the product on the platform.
2. Press the
3. Display will show the weighing number and weight´s product.
4. Remove the product from platform, display will show "0"
5. Place a new product on the platform.
6. Press again the
7. Repeat this operation as many times as it is necessary.
8. Once finished the accumulation, press the
9. Display will show : weighing times and total weight accumulated.
10. To clear, press the

FUNCTIONS SETTING

1. To access to Functions setting, press the
key, display will show the message "UF __1".
2. Press the
Parameter Function
UF-1 Check internal value and
battery voltage
UF-2 Parameter not available
UF-3 Auto power off setting
key to save in memory his weight.
key to accumulate the weighing.
key for 2 seconds.
key to select the desired parameter, from "UF—1" to "UF---9"
key, to read the total weight.
key and without release it press the
Operation
Press , display will show the internal value,
pressing again this key, display will show the
battery voltage.
Press to exit.
Press , display will show AOFF 00.
Press to change the parameter. .
Press to select the desired mode:
AOFF00 – Auto-power off disable.
AOFF01 – The indicator will auto power off in 1
minute if not use it. .
Press to exit.
8