Setting Up The Balance; Using The Balance; Basic Weighing - Gram FV Série Manuel D'utilisation

SETTINg UP ThE bALANCE

Warm up the unplugged balance at an indoor temperature for two hours
whenever moved it from a colder place, otherwise the accuracy will be
affected by condensation of in side and surface of the balance.
• Place the balance on a stable and level work surface.
• Level the balance by turning the adjusting feet, checking the level
indicator on the balance,until the bubble appears in the center of the
circle.
• Put the parts of the balance as following sequence: dust guard, draft
ring, pan support and pan.
• Plug in the AC adaptor.
• Check if the adaptor does match your main supply before plug in.

USINg ThE bALANCE

Note: To avoid dust, keep your balance door closed whenever it is not
continually used.
Plug in and pre-warm your balance at least 30 minutes before weighing.

basic weighing

1. Plug in the power, the balance will automatically proceed system
initialization and display status of off.
2. Press the
8
key, the balance will display 0.0000g.