Count Weighing - Gram FV Série Manuel D'utilisation

3. Place the container on the weighing pan.
4. Press the
5. Place the sample object in the container and close the doors.
6. Read out the value after display is stable.
7. Repeat the steps to weigh next object.

Count weighing

To decide the total number of the components of similar weights, first get the
weight of a known number of the components as a reference, then we could
get the average weight of the component. Then the amount of the components
on the pan will be decided.
1. First set the sample components quantity refer PARAMETER SETTINg (for
example, if the amount of sample is 50 pcs, you should setup the C2-2).
2. Press the
3. Press the
4. Place the sample on the pan, then press the
amount number of the samples. The unit displayed on the LCD display is PCS.
5. Add the sample components you want, you could read the value when [O]
is on the display.
6. Press the
PCS indicates piece number.
Note: The sample value should not be less than readability value.
key.
key, the balance will display 0.0000g.
key, till the balance will display PCS mode.
key to convert between counting mode and other mode.
key, the balance will read the
9