Operation; Weighing; Tare - Gram RK-3 Manuel D'utilisation

Note: After the first point calibration, the window can display the weight
value. If no need for the other point calibration, move to Step 6 to finish the
calibration procedure.
5. Add another weight 500g to the current weight. The window will show the
total weights value. Press to complete.
Repeat this step to complete the calibrations of on3, on4 and on5.
6. Press to save. After the window displays " ", It will return to
PASS
normal weighing mode.
Note: the window displays automatically when on5 is finished. It will
PASS
be saved and return to the normal weighing.

OPERATION

Weighing

Put item to be weighed on the scale. The Weight window shows 1.00kg (Gross
Weight).

Tare

When weighing a sample that must be held in a container, tare and store the
container weight into memory.
1. Under the weighing mode, put the container on the scale.
Press the key to complete tare action.
The symbol appears and the window displays as shown on the right
18