Gram RK-3 Manuel D'utilisation page 14

How to set current using units?
When parameter SET02 UNIT is selected, press SMPL to choose the desired
unit, press
next parameter setting.
SET03
ZERO
d0 (one division) , d1 (2 divisions), d2 (3 divisions), d3 (4 divisions),
d4 (5 divisions) and d5 (6 divisions)
SET04
C.6
OFF = previously set quantity checking values are not retained
when the unit is turned on.
ON = previously set quantity checking values are retained when the
unit is turned on.
SET05
CHSC
On: it starts checking weight when the weight and quantity are
within the checking range and the stable symbol appears.
Off: it starts checking weight once the weight and quantity are
within the checking range
SET06
BEEP
Hi: There will be a warning sound when the material quantity is more than
the upper limit, and the weight of the material is more than 20 divisions
14
to save the setting , then press
zero range setting
whether to save the upper & lower limit of quantity checking
stable weight checking setting: on, off
beep setting
or to advance to