Exporting Data To Pc In Form Excel - Gram RK-3 Manuel D'utilisation

ERR10 Wrong calibration weights
EXPORTING DATA TO PC IN THE FORM OF EXCEL
Introduction
Connect the scale with PC and set the parameter of external device as
"EXCEL" on the scale, then you could export the weighing data to PC in the
form of EXCEL. With this function, you could record/accumulate/average/
data statistical analysis the testing data, which we could call it as scale-
computer data management function.
Note: pls enable "Use Serial Keys" function in the computer.
Hardware connection and settings
1. Use transmitting serial wire or USB wire to connect scale and pc.
Note: pls install usb driver first, if you use usb wire.
2. Parameter settings in scale:
"PERI" = "EXCEL"
"BAUD" = "2400"/"4800"/"9600"
"PRT.M"= "KEY"/"STABLE"
"PRT.F" = "PRT.F01"
Place the right test weights
and the calibration value
should be below full load.
(external device)
(baud rate)
(printing model)
(printing format)
29