Accumulation - Gram RK-3 Manuel D'utilisation

Accumulation

1. Enter the indicated unit weight, press key and put first piece of load
on the weighing pan (or into a tared container). (Refer to 7-4-1 and 7-4-2)
2. Press key , the first accumulation event is displayed momentarily
before Symbol " " pointing at "M+". The display reverts to normal
weighing mode in a second .Remove the first piece
3. Put the second piece of load on, and then press key to add the second
accumulation event into memory. Repeat step 2-3 till accumulation actions
are finished.
Note: Maximum is 99 pieces. It is able to calculate the second deal when
returning to zero after the first one under the condition of more than (or equal
to) 20d with stability. Minus weight and gross weight can't be accumulated.
After resetting the sample value or unit weight, the quantity accumulated
will be adjusted automatically according to the new setting value.
Accumulation display
1. Press key to displays the total accumulation data (weight, quantity
and number of weighments)
2. Press or key to check the total events and
the first 10 accumulation events in detail.
3. When connecting PC, printer DMP or CK, press to output the events
Note:
XX=total accumulation events） XX=the single accumulation
T K
25