Turn-On / Turn-Off The Balance; Reset To Zero; Tare Function - Gram GX Série Manuel D'utilisation

TURN ON / TURN OFF THE BALANCE
Turn on
Press the key , the balance will beep. The display will show the version
number, the voltage level of battery and it will perform a self-checking 9, 8, 7,
,1,0, finally the display will show the value zero "0", now the balance is ready
for weighing.
Turn off.
Keep pressed the key for few seconds to turn off the balance.
Auto Turn off
After 10 minutes without using the balance, it will automatically turn off.
Turn off for low voltage
When the voltage is less than 5.6V, the display will show the message Err-1
and the balance will turn off.

RESET TO ZERO

When there are no objects placed on the pan and display doesn´t indicate
"0", press the key to correct the deviation, now the display reads "0".

TARE FUNCTION

Place a container on the weighing pan, press the key , the display will
show zero again and Tare symbol will light on. Put the product inside the
9