Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BASIC OPERATION
Key
In weighing mode
In parameter setting
Power on / off
Exit
Hold function and unit
Confirm
weight selection
Zero / Tare
Page down
Power ON
Press the
key for 1 second to power on the crane scale and start self test.
If the zero range is exceeded the display will show "ERR6" or goes to
weighing zero.
Power Off
Press the
key for 1 second, the crane scale will power off.
If the batteries are under voltage, the crane scale will power off automatically.
If there is no operation in 10 minutes, the crane scale will power off
automatically.
Tare / Zero
Tare
Press the
key to subtract the weight of a container, then put the product
8
Publicité
Table des Matières
