Command Output Mode - Gram FV Série Manuel D'utilisation

A. Zero stable output mode
1. Set the parameter setting to C5-00.
2. Keep the pan empty before each weighing in this mode.
3. Put the object on the center of the pan after¡0.0000 g¡is displayed.
4. A group of data will be output as the balance becomes stable
(stability indicator appears).
b. Stability output mode
1. Set the parameter setting to C5-01.
2. A group of data will be output whenever the balance becomes
stable (stability indicator appears). In this mode the objects could
be weighed after tarring or with the Tare or Accumulation.
C. Continuous output mode
1. Set parameter setting to C5-03.
2. Once you turn on the balance and a printer or a computer which is
perfectly connected to the balance, the data from balance will be
output continuously in an interval of 3 seconds.

Command Output Mode

Set the parameter setting to C5-02.
17