Initial Unit - Gram AHV Série Manuel D'utilisation

to be calibration weight value for precise accuracy).
• During calibration procedure, press
• After calibration procedure is finished, the balance will return to normal
weighing mode. Then press
mode again.
Check "Section 5" for more information about calibration.
•

Initial unit

Press key to move to parameter "CAL" (Span calibration) or press
key to move to parameter "InitU" (Initial unit weight).
Press key to enter into the parameter.
Press ,
oz t, GN, oz and ct. (Default: g).
Press key to confirm the unit you have chosen and press
to parameter menu. Press the
to return to normal weighing mode.
18
keys to choose the unit, which can be chosen from g, t, dwt,
key to return.
key to enter into "Parameters setup"
F
key to move to next setting or press the
key to return