Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press
,
keys to choose the transmitting mode from MA-LP, St-LP,
MA-Dt, St-Dt, MA-PC, St-PC, P-CONt, CLOSE, DISP. (Default: MA-LP).
CLOSE: Transmitting is unavailable.
P-CONt: The data will be transmitted continuously.
St-PC: When the display is stable, it will be transmitted to PC automatically.
MA-PC: When the display is stable, it can be transmitted to PC by pressing a key.
Press
key to confirm your choice and press
key to return to
parameters menu. Press the
key to move to next setting. To return to
normal weighing mode press the
key.
baud rate
Press
key to move to parameter "trn" (transmitting mode) or press the
key to move to parameter "rAtE" (to choose baud rate).
Press
key to enter into the parameter.
Press
,
keys to choose the baud rate from 1200, 2400, 4800 and 9600.
(Default: 9600).
21
Publicité
Table des Matières
