Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Press
key or
key to choose the sample size (10, 20, 50, 100, 200,
500 and 1000 pcs).
After a desired sample size has been chosen, put the samples as the chosen
key. Then the "Mode" symbol
sample size on the pan and press the
starts flashing and the "C" disappears.
Then the sampling procedure is finished. And the balance can be used for
parts counting.
Note: If the unit weight is two small (less than 0.2 scale division), the display
will show "- -or- -pcs".
Percentage weighing mode
In normal weighing mode, press
key twice to enter into percentage
weighing mode.
15
Publicité
Table des Matières
