Display On Other Peripheral; Connecting The Monitor Of The Kit To A Pc - Extel WESV 82400 Guide D'installation Et D'utilisation

7
DISPLAY ON OTHER PERIPHERAL (TV OR PC)
IMPORTANT
a. Connecting the monitor of the kit to a TV monitor
1. Turn the monitors off.
2. Connect the two monitors with the RCA/Jack cord supplied
3. Connect the mini jack cable at the back of the monitor to the AV output and the RCA
yellow (video) and white (audio) jack terminal ends (see image above).
4. Turn the monitors on.
5. When connecting the mini jack at the back of the monitor, the video turns off to be
displayed on the additional monitor (example TV)
b.Connecting the monitor of the kit to a PC
CAUTION
12GB
When connecting to the peripheral, the image of the monitor is
interrupted.
You must have installed on your PC the software supplied
in order to connect the monitor.
CFI EXTEL WESV 82400 - 06/2009 - V1
In case of a bad quality image, check
that the format of the video signal
selected is compatible with your
screen.
Do not use the USB cable for this
type of connection.
the RCA cable for this
type of connection.
Do not use