Zoom Function; Signal Quality - Extel WESV 82400 Guide D'installation Et D'utilisation

- Screen saver mode:
Brightness
TV out
O Power Save
h. Zoom function
Press the button to zoom in the video of the selected camera.
You have the possibility to move the zoomed video with the arrow buttons pqt u of
the monitor.
Press again this button to return to the initial video.
i. Signal quality
The reception quality is represented by bars at the right side of the antenna symbol on the
left upper corner of the screen. The higher the number of bars, the better signal quality.
See table below:
Level of signal
Very good
Good
Medium
Low
Absent
The video changes to saver mode after 2 minutes.
Press any button of the monitor to reactivate the video.
0 15
8
PAL
Press the « OK » key of the monitor and access the
AUTO
menu "System Setup" as previously.
Press the q to key access the "Power Save" menu,
and set on "ON" to activate it.
Display
1062~1280Kbps
725~1062Kbps
543~725Kbps
250~543Kbps
CFI EXTEL WESV 82400 - 06/2009 - V1
Flow VGA FPS
5~10Fps
0~250Kbps
QVGA FPS
15~30Fps
3~5Fps 12~20Fps
2~4Fps 8~15Fps
0~1Fps 0~4Fps
0Fps 0Fps
11GB