Setting The Sound Volume; Scan Time Or Quad Function - Extel WESV 82400 Guide D'installation Et D'utilisation

d. Viewing the camera(s)
To view one or several cameras (if you have installed additional cameras), use the key
the monitor.
CAUTION
To do so, press the « OK » key of the monitor, and make sure that the channels of the regis-
tered cameras are set on "ON" (example: "CAM1 ON").
To modify it, select the channel with the q key and modify the state with the t and u
keys.
The cameras in "OFF" position will not be visible during manual or automatic scrolling.
The number in the left upper corner of the screen indicates the selected camera.
Press again the same button to scroll the other cameras.
e. Setting the sound volume
Press the "OK" key a menu appears:
f. Scan Time or QUAD function
(to be used only in the case of several cameras)
Audio Vol
Scan Time
O
Pair CAM
in the case of several cameras, you must make sure that they
are parameterized on viewing in the menu.
10
5 Sec
CAM1 ON
CAM2 OFF
CAM3 ON
CAM4 OFF
1 2 3 4
Systern Setup
Factory Reset
CFI EXTEL WESV 82400 - 06/2009 - V1
Raise or lower the sound volume with the t and
u keys of the monitor.
Press the « OK » button of the monitor on
"SCAN TIME" with the
scrolling time (5, 10, 15, 20 seconds) or the display
in QUAD mode.
of
keys and, select the
9GB