Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

S e t u p y o u r p h o n e
Replace the back cover
1. Set the back cover on the
phone with the cover tabs
aligned with the slots in
the phone.
2. Slide the back cover toward
the top of the phone until the
back cover is securely in place.

Charge the battery

Note: Before you use a charger with this device, check its model number.
This device is intended for use when supplied with power from the AC-3
or AC-4 charger.
1. Plug the charger transformer into a standard wall outlet.
2. Insert the charger output
plug into the round jack
at the bottom end of
the phone.
After a few seconds, the
battery indicator on the
display starts to scroll from
bottom to top. If the battery
is completely discharged, it may take a few minutes before the charging
indicator appears on the display or before any calls can be made.
The ACP-12, ACP-9, ACP-8, ACP-7, and the LCH-12 can also be used to charge
the phone, but it must be used with the CA-44 adapter included in the box:
1. Plug the charger transformer into a standard wall outlet.
2. Insert the charger output plug into the CA-44 adapter jack. Insert the CA-44
plug into the jack on the bottom of the phone.
16

Publicité

Chapitres

Table des Matières
loading

Table des Matières