Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Set the timer
1. Select Menu > Tools > Timer > Normal timer, Interval timer, or Settings.
Normal timer measures the time for tasks that have one period (timer name).
Interval timer saves sets of times with more than one period.
2. Enter the time (in hh:mm:ss format), and select OK.
3. Enter a note for the timer, and select Start.
appears in the standby mode with the timer set. When the time runs out, your
device sounds an alarm, displays the timer note, vibrates (if set), and flashes its lights.
Press any key during the alarm to stop the alarm. After 30 seconds the timer alert
stops automatically.
Change the time
After you set the timer, you can change the time.
1. Select Menu > Tools > Timer > Change time.
2. Enter the new time, and select OK.
3. Leave the note as it was, or enter a new note; select Start.
Interrupt the timer
After you have set the timer, you can stop the timer. Select Menu > Tools >
Timer > Stop timer.

■ Stopwatch

You can use the stopwatch in your device to track time. The stopwatch displays
time in hours, minutes, seconds, and fractions of a second in hh:mm:ss:s format.
Using the stopwatch or allowing it to run in the background when using other
features increases the demand on battery power and reduces the battery life.
Measure time
1. Select Menu > Tools > Stopwatch > Split timing or Lap timing > Start.
The running time is displayed.
Split timing—You can use the split time function when you need to pace yourself,
for example in a long distance race. Select Split to note the lapsed time. The timer
continues to run, and the split time appears below the running time. Each time
you select Split, the new measured time appears at the beginning of the list.
T o o l s
85

Publicité

Chapitres

Table des Matières
loading

Table des Matières