Parkside PHZ 3 A1 Mode D'emploi page 7

WARNING! RISK OF CRUSHING!
► Be careful not to hurt your fingers when moving the carriage
forwards or backwards.
♦ Hold the red handle firmly with your other hand and push the
carriage towards the pull bar as a starting position.
♦ Pull the red handle towards the rear stop. The board is joined
seamlessly.
♦ If the board is not joined seamlessly, repeat the process with more
force.
♦ After use, tighten the black locking screw on the carriage to
prevent unintentional movement of the carriage.
PHZ 3 A1
GB │ IE │
5 ■