H Ot Water Econ Omiser Adj Ustment - Victoria Arduino EJ PRIMA Manuel D'instructions

+
-
The operations described
below must be carried out only
by specialized technicians.
The Manufacturer is
responsible for any damage
to things or persons deriving
from a failure to comply with
the above.
5.1
H OT WATER
ECON OMISER
ADJ USTMENT
Operation carried out
whit the machine turned
on.
Act with a screwdriver on the
screw located at the top of
the machine:
• Turn the adjustment screw
CLOCKWISE to INCREASE
the temperature of the hot
water.
QUALIFIED TECHNICIAN ADJUSTMENTS
• Turn the adjustment
screw ANTICLOCKWISE to
DECREASE the temperature
not
of the hot water.
E AG L E O N E P R I M A | L I B R E T TO I ST R UZ I O N I - U S E R H A N D B O O K - M A N U E L D 'I N ST R U CTI O N S | 52
5.2
FI L LING
STEA M BOI LER
AUTOM ATI CAL LY
All models EAGLE ONE are
equipped with a level gauge
to keep the water level inside
the boiler constant.
At the first start, the machine
automatically loads water
for 90 seconds, at the end
of which it stops if it has
reached the level.
If the machine still requires
water, the continuous/stop
buttons flash. Simply restart
the machine to complete
filling.
At the end of the installation,
the qualified technician must
provide the total replacement
of the water contained in the
boiler for at least three times
before using effectively the
machine.