Beta 1946 Mode D'emploi page 8

original sizes, using the spanner (40) and the drawing
enclosed with the exploded view. Then connect air and
reighten the nozzle holder keeping the lever (45) pressed.
Disassemble and inspect the piston units and tool assembling
every 3 months if the riveter is used every day, replacing any
worn parts.
All the parts subject to significant wear are included in the
spare parts list in bold type; they are available as item 1946BR.
We recommend using the enclosed exploded view as a manula
to disassemble and assemble the tool as well as to identify any
spare parts.
WARRANTY
This tool is manufactured and tested with the greatest care, in
accordance with current safety regulations, and is covered by a
12-month warranty.
We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or
replacing them at our discretion. Should assistance be asked
for during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover any defects due to wear, misuse, or
breakdowns caused by blows and/or falls. In addition, this
warranty will no longer be valid if any changes are made, or if
the tool is tampered with or sent to the customer service in
pieces.
This warranty explicitly excludes any damage to people and/or
things, whether direct or consequential.
HOW TO HAVE THIS WARRANTY VALIDATED
This warranty certificate consists of two parts. Fill in both parts
properly, specifying the following: date of purchase, fiscal
receipt number, item number, serial number, name and
surname or company and address; see that the seller affixes its
stamp complete with company's name and address on both
coupons.
Send coupon "A" to the distributor no later than 15 days from
the date of purchase and keep coupon "B" accompanied with a
copy of the fiscal receipt, to be shown to the seller in the event
of any failure.
DECLARATION OF CONFORMITY TO THE "MACHINE"
DIRECTIVE
BETA UTENSILI SPA
VIA A. VOLTA, 18
20050 SOVICO (MI)
hereby certify, assuming full responsability, that the product:
AIR RIVETER
item 1946
complies with the following standards, according to the
requirements set by the "Machine Directive":
89/392/EEC and amendments 91/368/EEC and 93/44/EEC.
Place and date of issue
SOVICO (MI) ITALY
January 2001
Name and title of the person in charge
MASSIMO CICERI
(Managing Director)
SPECIFICATIONS
TRACTION POWER
STROKE LENGHT
AIR INLET
WORKING PRESSURE
MAXIMUM WORKING PRESSURE 6,2 Bars
MINIMUM INTERNAL HOSE SIZE
MAXIMUM AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
SOUND PRESSURE
SOUND POWER
MAXIMUM RIVET CAPACITY
we
ITALY
8000 N
14 mm
1/4" taper GAS
6,0 Bars
6 mm
1,2 l
1,51 Kg
228 mm
81,2 dB (A)
(pr EN 50144)
87,8 dB (A)
(pr EN 50144)
Ø4,8 aluminium