Sony VPL-HS20 Mode D'emploi page 35

MENU SETTING
Item Description
Status Set to Off to turn off the on-screen
displays except for the menus, message
when turning off the power, and warning
messages.
Language Selects the language used in the menu and
on-screen displays. Available languages
are: English, Dutch, French, Italian,
German, Spanish, Portuguese, Russian,
Swedish, Norwegian, Japanese, Chinese,
and Korean.
Menu Position Selects the display position from Top
Left, Bottom Left, Center, Top Right
and Bottom Right.
Menu Color Selects the tone of the menu display from
White or Black.
INSTALL SETTING
Item Description
V Keystone Corrects the vertical trapezoidal distortion
of the picture. (
Auto: Normally set to this postion.
Manual: Sets a lower value (– direction)
when the bottom of the trapezoid is
longer than the top. Sets a higher value
(+ direction) when the top of the
trapezoid is longer than the bottom. If
you project the picture using "Side
Shot" only, set to "Manual," and adjust
the level to "0."
Note
The "V Keystone" adjustment may not correct
the trapezoidal distortion perfectly, depending on
the room temperature or the screen angle.
Side Shot Corrects the horizontal trapezoidal
distortion of the picture. (
Set the level to "0" when you adjust the
picture using "V Keystone" only.
Note
Even when projecting using "Side Shot",
four sides of a picture may sometimes not
be parallel to the sides of a screen frame.
Image Flip Flips the picture on the screen horizontally
and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and
vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Background Selects the background color of the screen
when no signal is input. You can select
"Black" or "Blue."
Test Pattern When set to On, a test pattern is displayed
on the screen when adjusting using the
"Lens Zoom," "Lens Focus," "Side Shot"
or "V Keystone." If you do not want to
display a test pattern, set to Off.
High Altitude Off: Use this setting when using the
Mode
projector at normal altitudes.
On: Use this setting when using the
projector at an altitude of 1,500 m or
higher.
INFORMATION
Item Description
fH Displays the horizontal frequency of the
input signal.
fV Displays the vertical frequency of the input
signal.
Lamp Timer Indicates how long the lamp has been
turned on.
)
)
35
Menu Lists
GB