VINCENT SA-94 Manuel D'utilisation page 25

1 2
1. POWER
This is the main power switch for turning on and
off the device. The preamplifier is separated from
the mains voltage when switched off and cannot
be set into a standby state.
2. MUTE
Press this button to mute your system's loudspea-
kers as an effect of muting the signals of the pre-
amplifier output "OUTPUT" (9), and the recording
output "REC OUTPUT" (8).
3. Sensor diode for the remote control
4. Display
In normal use the display shows the name of the
selected input and the volume setting. As long as
FRONT VIEW
3 5 4
adjustments are being made (e.g. to MUTE,
BALANCE, GAIN), the relevant values are pre-
sented.
5. Input selector keys
With a touch on one of these buttons you choose
for playback one of the audio sources attached to
the corresponding connectors at the amplifier's
backside (7).
6. VOLUME /
These are the keys for the adjustment of the main
volume level of the system. They consequently
control the signal of the preamplifier outputs
"OUTPUT" (9).
6
: Volume keys
Vincent
25