Optional Accessories - Leica DM1000 Mode D'emploi

6.9 Optional Accessories

Camera
A camera can be connected via an adapter.
• Attach the adapter to the top port of the tube
and fasten it tightly with the side clamping
screw.
• Screw on the camera.
Note:
The size of the camera chip and the mounting
system (B-mount, C-mount, etc.) must be
considered when choosing an adapter.
See table.
Without Zoom Magnification, Only for 1-Chip-Cameras:
C-mount adapter 1 x HC
C-mount adapter 0.63 x HC
C-mount adapter 0.5 x HC
C-mount adapter 0.35 x HC
With Zoom Magnification (Vario TV Adapter) for 1-3 Chip-Cameras:
C-mount, 0.32-1.6 x HC
B-mount (ENG), 0.5-2.4 x HC (1/2-inch)
+)
from zoom factor 0.42 x only!
Without Zoom Magnification, for 1-3 Chip-Cameras:
C-mount adapter 1 x
B-mount adapter 1 x
B-mount adapter 1.25 x
F-mount adapter 1 x
F-mount adapter 1.25 x
Plus (essential requirement): TV optics 0.5 x HC
Calculation of the magnification on the monitor
The magnification M
calculated with the following formula or
measured with a stage micrometer and a cm
scale:
M = Objective magnification x
TV
factor of magnification changer*x
TV adapter magnification x
monitor diameter
chip diameter of camera
Recorded picture diagonal in mm for
1 inch 2/3 inch
camera camera
16 11
- 17.5
- -
- -
- -
- -
- -
- -
- 17.5
- -
- 17.5
6. Assembly
on the monitor can be
TV
1/2 inch 1/3 inch
camera camera
8 6
12.7 9.5
16 12
- 17.1
+)
19 -5 18-3.8
16-3.3 -
16 12
16 12
- -
16 12
- -
25