Leica DM1000 Mode D'emploi page 26

6. Assembly
Ergomodule
For raising the eye level of the tube opening, the
30 mm or 60 mm ergomodule may be used.
It is fastened in place with the side clamping
screw.
Ergolift
A base for the stand featuring adjuster wheels
for the base's height and angle is available to
ensure an optimal working position.
Magnification Changer
Optionally, a magnification changer (fig. 20) can
be used, which is manually operated. On the
knurled ring, the following magnification factors
can be set:
1x; 1.5x; 2x
Fig. 20 Magnification
changer
26
Viewing Attachments
Viewing attachments
pointers are available for groups of up to 20
viewers.
The support (21.3) must be aligned precisely.
The fade-in arrow can be moved in x and y
direction (move the lever vertically or pull out/
push in) (21.1) If this lever is rotated, the color of
the arrow can be changed (red/yellow). Use the
brightness control (21.2) to adjust the brightness
of the arrow.
Fig. 21 Viewing attachment
1 Movement of light pointer in x and y direction,
and switchover of color filter
2 Brightness control
3 Adjustment of arm support
The external power supply (illuminated arrow) is not
illustrated.
1 2
featuring illuminated
3