Optional Accessories - Leica DM3 XL Mode D'emploi

6.7 Optional Accessories

Camera
A camera can be connected via an adapter.
• Attach the adapter to the top port of the tube
and fasten it tightly with the side clamping screw.
• Screw on the camera.
Note:
The size of the camera chip and the mounting
system (B-mount, C-mount, etc.) must be consid-
ered when choosing an adapter.
See table.
Without zoom magnification, for 1-chip cameras only:
C-mount adapter 1 x HC
C-mount adapter 0.70 x HC
C-mount adapter 0.55 x HC
C-mount adapter 0.35 x HC
With zoom magnification (Vario TV adapter) for 1-3 chip cameras:
C-mount, 0.32-1.6 x HC
B-mount (ENG), 0.5-2.4 x HC (1/2 inch)
from zoom factor 0.42 x only!
+)
Without zoom magnification, for 1-3 chip cameras:
C-mount adapter 1 x
B-mount adapter 1 x
B-mount adapter 1.25 x
F-mount adapter 1 x
F-mount adapter 1.25 x
Additionally required for each:TV optics 0.5 x HC
Calculating the magnification on the monitor
The magnification V on the monitor can be cal-
TV
culated according to the following formula or
measured using a stage micrometer and centi-
meter scale.
V = Objective magnification x
TV
Factor magnification changer* x
Magnification of adapter* x
Screen diameter
Chip diameter of the camera
Recorded picture diagonal in mm with
1 inch 2/3 inch 1/2 inch
camera camera
16 11
- 15.5
- -
- -
- - 19
- - 16-3.3
- - 16
- -
- 17.5
- -
- 17.5
6. Assembling
1/3 inch
camera camera
8 6
11.4 7.8
14.5 10.9
- 17.1
-5 18-3.8
+)
-
12
16 12
- -
16 12
- -
23