Warning Dos - Mantis 7940 Manuel De L'utilisateur

If the tiller is used improperly or safety precautions
are not followed, the users risk serious injury
to themselves and others.
Read and understand this manual before
attempting to operate this tiller.
IV. WARNINGS - DO
Read and understand the owner's manual.
Pay particular attention to all sections
regarding safety.
1. Always keep a firm grip on both
handles while the tines are moving and/
or the engine is running. BE AWARE!
The tines may continue to spin after
throttle trigger is released and continue
to pose a hazard. Make sure tines have
come to a complete stop and engine is
off before letting go of the tiller.
2. Always maintain a firm footing and
good balance. Do not overreach while
operating the tiller. Before you start to
use the tiller, check the work area and
remove any obstacles that might cause
you to lose your footing, balance, or
control of the machine.
3. Thoroughly inspect the area where
equipment is to be used and remove
all objects that can be thrown by the
machine.
4. Always keep area clear of children,
pets, and bystanders.
5. Always stay alert. Watch what you are
doing and use common sense. Do not
operate unit when fatigued.
4
that can start fires around dry vegetation. A spark
6. Always dress properly. Do not wear
loose clothing or jewelry that could get
caught in moving parts. Use sturdy
gloves to reduce the transmission of
vibration to your hands, as prolonged
exposure to vibration can cause
numbness and other ailments.
7. Always wear substantial footwear and
long trousers while working. Do not
operate the equipment when barefoot or
wearing open-toe sandals.
8. Always wear ear and eye protection.
Eye protection must meet applicable
CE or ANSI standards. To avoid hearing
damage, we recommend hearing
protection be worn whenever using the
equipment.
9. Keep the engine and petrol/gas storage
area free of vegetative material and
excessive grease to reduce fire hazard.
10. Start the engine carefully, according
to all manufacturer's instructions and
with feet well away from tool(s).
11. Keep all nuts, bolts and screws tight
to be sure the equipment is in safe
working condition.
12. Use extreme caution when reversing
the tine direction or pulling the machine
toward you.
Operator's Manual
Operation of this equipment may create sparks
arrestor is installed. The operator should contact
local fire agencies for laws or regulations relating
to fire prevention requirements.
13. Work only in daylight or with good
artificial light.
14. Always be sure of your footing on
slopes.
15. Exercise extreme caution when
changing direction on slopes.
16. Always keep a safe distance between
two or more people when working
together.
17. Always inspect your tiller before each
use. Tighten all loose hardware to be
sure the equipment is in safe working
condition.
18. Always visually inspect to ensure
that the tools are not worn or damaged.
Before using your tiller, replace worn or
damaged elements and bolts in sets to
preserve balance.
19. Always maintain and examine your
tiller with care. Follow maintenance
instructions given in manual.
20. Always store tiller in a sheltered area
(a dry place) not accessible to children.
21. Always remember the operator or user
is responsible for accidents or hazards
occurring to other people or their
property.