Alarm Function - AEG MRC 4148 DAB+ Mode D'emploi

3. If the reception is too weak and there is noise on the
received station, try to improve the reception by changing
the position of the telescopic antenna.
Show FM information
Press the MENU button to show the following information, if
broadcasted by a radio station.
• The program type (PTY) of the station is displayed (e.g.
Pop music, news etc.). If no PTY is received, <Program
Type> appears on the display.
• Display of the signal strength
• Display of date and time
• Display of the radio frequency.
• The audio mode transmitted by the station is displayed.
STEREO or MONO.
• The radio text is displayed in the display. If no information
is available, <Radio Text> appears on the display.
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
NOTE:
In Germany approx. 70% of the country' s area is covered by
digital radio broadcasts (as of Nov. 2011). In the individual
areas however, coverage and provision vary greatly. If the
DAB stations in your region cannot be received or only with
interferences depending on location, in this case you can
switch to the FM band to receive this station. This is only
possible however if these stations are broadcast via VHF.
Find out more on the internet site of the radio station.
1. Press the MODE button repeatedly until "Switching to
DAB" appears on the display.
2. Keep the / TUNE + button pressed. "Autotune Full
Scan" appears for a short time in the display. The de-
vice then searches for the radio stations which can be
received.
3. You can select the next or the previous station by using
the / TUNE + / / TUNE – buttons.
4. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
NOTE:
• For optimum DAB reception, we recommend to align
the telescopic antenna vertically.
• To manually set a DAB frequency, proceed as described
in the "Manual search for DAB stations" sections.
Manual search for DAB stations
1. Keep the SELECT / SNOOZE / SLEEP button pressed.
"Manual Tune" appears for a short time in the display.
MRC4148DAB+_IM
2. Select the desired frequency with the
/ TUNE – buttons. "Tuning..." appears in the display.
The unit searches for stations that can be received.
3. Press the SELECT / SNOOZE / SLEEP button briefly twice.
"MAN" appears at the right top in the display.
4. Now you can use the / TUNE + /
to go through the detected stations.
5. Press the SELECT / SNOOZE / SLEEP button briefly twice
to quit manual search. "DAB+" appears at the right top
in the display.
NOTE:
Manual search also finds stations which only transmit data
for special services, like geo-coding data. The display
shows "Data unsupported".
Display additional DAB information
In DAB mode, you can display the following additional
information if broadcast by the radio station. To do so, press
the MENU button.
• This indicates the station category (e.g. Pop-Music, News
etc.).
• Displays the name of the station group (e.g. DR
Deutschland).
• Frequency of the current radio station.
• Displays the digital Audio Bit Rate.
• Displays the received signal strength.
• Display of date and time
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played.
Save station
1. If you have found the desired station, hold down the
PRESET button. The first preset location appears on
the display. When the preset location is empty, (Preset
Empty) is displayed.
2. For choosing the memory position, press
/ TUNE – buttons.
3. Press SELECT / SNOOZE / SLEEP to save the settings.
Select a preset station
1. Press the PRESET button.
2. Press the / TUNE + /
memory position.
3. Confirm your selection with the SELECT / SNOOZE /
SLEEP button.

Alarm function

You can set the unit to turn on at a specified time. Two wake-
up times can be set.
• To select an option, press the
buttons. The option actually to be set flashes.
English
39
/ TUNE + /
/ TUNE – buttons
/ TUNE + /
/ TUNE – buttons to choose a
/ TUNE + / / TUNE –
26.02.16