Export Activities - Quicke Q-Companion BT Notice Originale

3.5.2. Export activities

In order to export recorded activities to the mobile
application follow these steps:
1. To transfer recorded activities and results, select the
"Import" item in the app menu.
2. If you have not paired your mobile phone with your Q-
companion display before, the list will be empty. If you
have paired the two units before, the display will be
shown in the list and you can connect by pressing the
name.
3. To add a new display in the app, press the plus sign in
the top right corner. Your mobile phone will then scan
for the display, so make sure it is powered up.
4. The first time you connect to import activities, it is
necessary to perform a few settings. The purpose
of these settings is to reduce the amount of manual
information you have to enter later, when importing
data into the app. You will need to tell:
- The loader registered in the app that is
connected to the Q-companion display in
the tractor
- The implements registered in the app that
correspond to the implements you setup and
used in the Q-companion display
The display will show a progressbar while the activities are
transferred. Once the activities have been transferred to the
mobile they will no longer exist in the display.
Activity
Exporting activities ...
15 / 43
Fig.60 Export activities
37
Operation