Quicke Q-Companion BT Notice Originale page 32

Operation
Magnus A
0
43
1575
bucket / gravel
When the system, after a weighing lift is performed, detects
that the target weight will be reached or exceeded, it will
notify you that an action is required. The target weight and
current weight will be highlighted with borders and a longer
sound notification is heard.
If the weighing mode is set to Automatic and the system detects that the target weight will be reached or exceeded, the
weighing mode will automatically switch to Manual and prompt you for an action.
You can then either:
- Accept the overshoot in target weight and add
the weight anyway
- Dump some of the load and do a new weighing
lift
When you add the last load to reach or exceed the target weight, the weight is added to the sum and the target weight is
deactivated and set to 0.
14:56 Weight settings
Remove last weight
Auto
Remove tare
13
Clear sum
79000
51625
Target weight
kg
Fig.43 Weight settings
magnus
0
43
bucket / gravel
Fig.44 Target weight reached
30
Target weight
Display name
Edit name
Set
valtra ___
n
Clear
14:56
Man
13
1300
78300
1575
kg