Maintenance Reminder; Activities; Log Activities - Quicke Q-Companion BT Notice Originale

3.4. Maintenance reminder

The purpose of the reminder-functionality is to help
maintaining the loader in good condition. For best
performance and longer life, maintenance shall be
performed on the loader at regular intervals.
The system keeps track of the loader usage and reminds you
when it is time to perform maintenance. When the loader
needs maintenance, the Q-companion display will show a
maintenance indicator in the status bar.
To see when maintenance shall be performed, or to clear the
indicator after maintenance has been performed, enter the
Maintenance menu and the specific maintenance action.
The maintenance reminders in the Q-companion BT display
are synchronised to the Q-companion mobile app, when
recorded activities are transferred over Bluetooth. If a
maintenance reminder is needed, it will also be shown in
the app.
Settings
User settings
Diagnostics
Maintenance
Loader setup
Display settings
Factory reset

3.5. Activities

Q-companion is able to log/record the work that is
performed with the front loader. This information can be
exported to the Q-companion mobile app and web site,
where you get easy access to information which work has
been performed, the total number of lifts as well as the
total and average weight of your lifts. If you wish to export
your accumulated work results to the Q-companion app, for
easier documentation, it is recommended that you create
separate activities for each distinct task or job you perform.
This will then ensure, that in the mobile app the tasks are
split into different activities.

3.5.1. Log activities

You can start, pause or stop an activity in the Weighing view
or the Position view. An ongoing activity is indicated by
the Activity timer, visible in the Weighing view, Position
view and the Home screen. When an activity is ongoing, all
accumulated weighing lifts are registered in the activity.
bucket / gravel
Fig.54 Maintenance reminder
Maintenance
Lubrication
7 hrs
3 hrs
Check bolts
Fig.55 Maintenance reminder
bucket/ gravel
Fig.56 Activities
35
magnus
0
43
Lubrication
Lubricate greasing points with
universal grease (see manual)
Time to
maintenance
Press X to reset
maintenance counter
magnus
00:56:34
0
43
79000
51625
1575
Operation
14:56
26
7
hrs
14:56
Auto
13
kg