User Settings; Rename User; Activate User - Quicke Q-Companion BT Notice Originale

2.4. User settings

It is very useful to correctly set date and time when setting up Q-companion. When recording activities with Q-companion BT,
the date and time of work is recorded. When exporting activities into the Q-companion mobile app, the date and time setting
is also transferred, helping you document when work has been done and how long it has taken. When connecting your mobile
phone with the Q-companion display using Bluetooth, the date and time in the Q-companion display is synchronised with the
time and date in the mobile phone.

2.4.1. Rename user

When a user is created, it assumes a default name of "user <#>". The user name can/should be changed to distinguish between
different users and to match the operators real name.When you start using the Q-companion BT display, you should edit the
default user name to match your name.
User settings
johan
johanna
malin
anders
New user
1. Select which user to configure.

2.4.2. Activate user

To activate active user, enter User settings and select the user you want to activate.
User settings
johan
johanna
malin
anders
New user
1. Select the user you want to change to.
malin
Select
Edit name
Delete
2. Select Edit name and confirm
by pressing the check mark.
Fig.25 Rename user
2. Select Select and press confirm.
Fig.26 Activate user
23
malin
Edit name
malin j
3. Change name by pressing up or
down and right or left. Confirm
name by pressing right on the last
character.
malin
Select
Edit name
Delete
Setup
o _